Module Player V1.0 ==================== Release date : 28/1/91 Programmed by :- Matrix of Crack UK (C) 1991 Documents by :- Matrix of Crack UK (C) 1991 Programs supported : ===================== NoiseTracker V1.0 - V2.12 Soundmon V2.0 Explanation : ============== This program was designed to allow you to play music from various music programs. Loading : ========== The program is CLI-based. Which means that the name has to be typed in from the CLI prompt, E.g. >Player If the example above was entered a credit will appear after a short delay, stating the name of the program, the author ( Me !!) and a brief description on how to use the program. To actually load and play a module you will need to type in the name of the module, E.g. >Player DF1:MODULES/TUNE1 The example above would load in a module called 'TUNE1' from the disk in Drive 1 and the directory name 'MODULES'. Most people will be familiar with this type of structure, which is commonly known as the Directory Path. NOTE : The after each command line simply means to press the RETURN key. If you only have one disk drive ( the internal ) then sometimes you may be prompted to swap between the disk with the Player program on it and the disk with the music on. Playing : ========== When you have selected the tune you want to play, press RETURN and after a delay ( How long depends on how big the tune you want is ! ) the screen will go black and you will see some Channel Meters on screen. When the music is in full swing all of these will be pulsing in and out. When there is no music there will be no pulsing bars. Exiting : ========== When you have had enough of the music simply press the left-mousebutton ( The mouse should be connected to Joystick Port 1 -: JOY 1 :- ). This should return you to the CLI-prompt. If it doesn't check your mouse is plugged in correctly. Failing this, do a Keyboard Reset : CTRL - LEFT AMIGA - RIGHT AMIGA Errors : ========= Sometime during your use of this program you will get an error. There now follows a run-down of the errors in this program :- ERROR : File open error. CAUSE: You have tried to load a module that does not exist. SOLUTION: Check that the module is on the disk. Check that your Directory Path is correct. ERROR: Module too large. CAUSE: You have tried to load a module that is too big to handle. Modules upto 250K are accepted. SOLUTION: You will just have to try with a different module. ERROR: File read error. CAUSE: An error has been detected whilst loading the module. This could be a disk fault ( a corrupted disk ). SOLUTION: Try loading the module again. If that fails try loading the module into the music program that the module came from. If the module loads into the music program correctly then send a copy of the disk with the offending module on it to me. ERROR: That was not a recognised module. CAUSE: You have tried to load a module which is either not a music module or is not yet supported by the program. SOLUTION: Check that the module you loaded was a music module. Otherwise you will have to load a different module. Notes : ======== Some SoundTracker modules may load (V2.3 upwards). The new NoiseTracker 'RESTART' command is now supported. NoiseTracker modules made with V2.13 upwards may load into this program. But i haven't seen any of these versions to test it out. I do not think that other versions of Soundmon will load into the program. When i get different versions i will update the program to support them. Version updates : ================== Features to expect in Player V2.0 :- More music programs supported ( Future Composer etc. ) Better Channel Meters Better memory management User requests : ================ If you have any ideas, suggestions or have found any bugs then write to me. If you have a new music package and want Module Player to be able to play the tunes from this package. Send the package and the Replay-Routine ( Written in 68000 machine code ) to me at :- MATRIX 16 SOUTH VIEW BOVEY TRACEY S.DEVON TQ13 9AQ ENGLAND Guaranteed return of all disks sent to me. Also, if you are a programmer and want to contact me then please do so (Send a disk with some of your work on it, No Disk = No Reply).